Vapor Intrusion

Vapor intrusion occurs when volatile chemicals from contaminated soil or groundwater migrate through the subsurface and enter a building. Vapors can move through the soil and enter through cracks in foundations, utility penetrations, floor drains, and other openings. Subsurface contamination may warrant a vapor intrusion investigation but it does not automatically establish that vapors have entered a building or affect indoor air quality.

Understand the source, pathway, and building

A vapor intrusion investigation considers the chemicals involved, the location and extent of contamination, soil and groundwater conditions, building construction, utilities, and potential entry routes. Contamination may originate on the property or migrate from a neighboring property.

Chemicals detected in indoor air may also come from building materials, cleaning products, stored chemicals, or outdoor air. Identifying the source requires evaluating sampling results alongside building conditions, chemical use, and other possible sources. A single indoor air sample may not establish whether contamination is entering from below the building.

Sampling results need careful interpretation

Soil gas, sub-slab soil gas, groundwater, and indoor air samples provide different information about potential vapor intrusion. Soil gas sampling helps evaluate vapors beneath the property. Sub-slab sampling measures vapors directly beneath a building’s foundation. Indoor air sampling helps determine whether volatile chemicals are present inside the building. Groundwater sampling can help identify a potential source of contamination.

Sampling conditions also matter. Weather, seasonal groundwater changes, building pressure, heating and ventilation systems, and building operations can affect results. A single sampling event may not capture changes over time or conditions when ventilation systems operate differently.

Screening levels help determine whether additional investigation or evaluation may be necessary. They are not necessarily final cleanup standards, proof of indoor exposure, or evidence that a particular person suffered harm. The applicable agency guidance, chemicals involved, building conditions, and site-specific circumstances all matter.

In California, Regional Water Quality Control Boards and DTSC oversee many investigations involving vapor intrusion. The applicable agency and regulatory requirements depend on the site, source of contamination, and cleanup program.

Mitigation may require continuing operation and maintenance

Addressing vapor intrusion may involve removing or treating the contamination source, installing a vapor barrier, or using a system that collects and removes vapors from beneath the building before they enter indoor spaces. The appropriate response depends on the chemicals involved, the source and extent of contamination, the building design, the risk evaluation, and agency requirements.

Installing a mitigation system does not necessarily end the owner’s obligations. The system may require ongoing operation, monitoring, inspections, maintenance, repairs, and reporting. Construction, tenant improvements, utility work, and changes to building operations can compromise the system or affect its performance.

Property owners and operators should establish who is responsible for maintaining the system, paying for its operation, monitoring its performance and responding to equipment failures. Review applicable land use restrictions, agency approvals, and continuing obligations before assuming that ordinary building maintenance is sufficient.

Transactions and a change in property use

A buyer, lender, landlord, or tenant may need to evaluate existing vapor intrusion reports, mitigation system performance, access rights, disclosure obligations, and responsibility for future work. A change in building use can also affect the evaluation. Converting an industrial or commercial building to housing, for example, may introduce different exposure assumptions and require additional investigation or mitigation.

For brownfield redevelopment, coordinate the environmental remedy with building design and construction plans. Excavating contaminated soil may address one source of vapors without resolving contamination in groundwater or migration from a neighboring property. Evaluate the remaining vapor intrusion risks and any continuing mitigation requirements before finalizing the development plans or transaction documents.

Questions about vapor intrusion

Does contaminated groundwater mean indoor air is contaminated?

No. Contaminated groundwater does not automatically mean that vapors have entered a building or affected indoor air quality. The evaluation depends on the chemicals involved, the migration pathway, building conditions, sampling results, and other potential sources of indoor contamination.

Can a change from industrial to residential use require more vapor intrusion review?

Yes. Residential use may involve different occupancy patterns, building conditions, and exposure assumptions than industrial use. A proposed change in use may require additional investigation, updated risk evaluation, or changes to existing mitigation measures.

Sources and agency resources

Evaluating vapor risk or an existing mitigation system?

Discuss agency requirements, property use, access, and responsibility for ongoing controls.

Discuss Your Matter

This information is educational, not legal advice or a legal opinion. Reading it does not create an attorney-client relationship. Requirements and available options depend on the facts and applicable law.

Scroll to Top